The Magnetosome Protein, Mms6 from Magnetospirillum magneticum Strain AMB-1, Is a Lipid-Activated Ferric Reductase.

Magnetosomes of magnetotactic bacteria consist of magnetic nanocrystals with defined morphologies enclosed in vesicles originated from cytoplasmic membrane invaginations. Although many proteins are involved in creating magnetosomes, a single magnetosome protein, Mms6 from Magnetospirillum magneticum strain AMB-1, can direct the crystallization of magnetite nanoparticles in vitro. The in vivo role of Mms6 in magnetosome formation is debated, and the observation that Mms6 binds Fe3+ more tightly than Fe2+ raises the question of how, in a magnetosome environment dominated by Fe3+, Mms6 promotes the crystallization of magnetite, which contains both Fe3+ and Fe2+. Here we show that Mms6 is a ferric reductase that reduces Fe3+ to Fe2+ using NADH and FAD as electron donor and cofactor, respectively. Reductase activity is elevated when Mms6 is integrated into either liposomes or bicelles. Analysis of Mms6 mutants suggests that the C-terminal domain binds iron and the N-terminal domain contains the catalytic site. Although Mms6 forms multimers that involve C-terminal and N-terminal domain interactions, a fusion protein with ubiquitin remains a monomer and displays reductase activity, which suggests that the catalytic site is fully in the monomer. However, the quaternary structure of Mms6 appears to alter the iron binding characteristics of the C-terminal domain. These results are consistent with a hypothesis that Mms6, a membrane protein, promotes the formation of magnetite in vivo by a mechanism that involves reducing iron.

An ultra-red fluorescent biosensor for highly sensitive and rapid detection of biliverdin.

The important role of BV in clinical diagnostics of liver-related diseases has been established in veterinary medicine. However, the sensitivity and selectivity of the current BV assays remain relatively low compromising its wider application in clinical diagnosis. Herein, we developed a rapid and sensitive BV-detecting biosensor based on a novel far-red fluorescent protein smURFP, which produced fluorescence only through specific interaction with its cofactor BV. In our study, the binding of BV to smURFP was then systematically optimized based on the structures of the smURFP + BV complex to increase the sensitivity of our biosensor. A wide linear range from 0 µM to 25 µM was obtained in both chicken and human serum. The limit of detection (LOD) and limit of quantification (LOQ) for BV was as low as 0.4 nM and 1.5 nM in human serum, and 0.4 nM and 1.2 nM in chicken serum. To our knowledge, this is the lowest LOD that has ever been reported for a BV biosensor. Our study sheds light on the biological and clinical analysis of BV.

Benzene Derivatives from Ink Lead to False Positive Results in Neonatal Hyperphenylalaninemia Screening with Ninhydrin Fluorometric Method.

Ninhydrin-based fluorometric quantification of phenylalanine is one of the most widely used methods for hyperphenylalaninemia (HPA) screening in neonates due to its high sensitivity, high accuracy, and low cost. Here we report an increase of false positive cases in neonatal HPA screening with this method, caused by contamination of blood specimen collection devices during the printing process. Through multiple steps of verification, the contaminants were identified from ink circles printed on the collection devices to indicate the positions and sizes of blood drops. Blood specimens from HPA-negative persons collected on these contaminated collection devices showed positive results in the fluorometric tests, but negative results in tandem mass spectroscopy (MS/MS) experiments. Contaminants on the collection devices could be extracted by 80% ethanol and showed an absorption peak around 245 nm, suggesting that these contaminants may contain benzene derivatives with similar structure to phenylalanine. High-performance liquid chromatography (HPLC) analysis of the ethanol extracts from contaminated collection devices identified two prominent peaks specifically from the devices. Methyl-2-benzoylbenzoate (MBB, CAS#606-28-0) was found as one of the major chemicals from contaminated collection devices. This report aims to remind colleagues in the field of this potential contamination and call for tighter regulation and quality control of specimen collection devices.

Correction: Protein patterns template arrays of magnetic nanoparticles.

[This corrects the article DOI: 10.1039/C6RA07662A.].

Iron Ion and Iron Hydroxide Adsorption to Charge-Neutral Phosphatidylcholine Templates.

Surface-sensitive X-ray scattering and spectroscopy techniques reveal significant adsorption of iron ions and iron-hydroxide (Fe(III)) complexes to a charge-neutral zwitterionic template of phosphatidylcholine (PC). The PC template is formed by a Langmuir monolayer of dipalmitoyl-PC (DPPC) that is spread on the surface of 2 to 40 µM FeCl3 solutions at physiological levels of KCl (100 mM). At 40 µM of Fe(III) as many as ∼3 iron atoms are associated with each PC group. Grazing incidence X-ray diffraction measurements indicate a significant disruption in the in-plane ordering of DPPC molecules upon iron adsorption. The binding of iron-hydroxide complexes to a neutral PC surface is yet another example of nonelectrostatic, presumably covalent bonding to a charge-neutral organic template. The strong binding and the disruption of in-plane lipid structure has biological implications on the integrity of PC-derived lipid membranes, including those based on sphingomyelin.

Morphological transformations in the magnetite biomineralizing protein Mms6 in iron solutions: a small-angle X-ray scattering study.

Magnetotactic bacteria that produce magnetic nanocrystals of uniform size and well-defined morphologies have inspired the use of biomineralization protein Mms6 to promote formation of uniform magnetic nanocrystals in vitro. Small angle X-ray scattering (SAXS) studies in physiological solutions reveal that Mms6 forms compact globular three-dimensional (3D) micelles (approximately 10 nm in diameter) that are, to a large extent, independent of concentration. In the presence of iron ions in the solutions, the general micellar morphology is preserved, however, with associations among micelles that are induced by iron ions. Compared with Mms6, the m2Mms6 mutant (with the sequence of hydroxyl/carboxyl containing residues in the C-terminal domain shuffled) exhibits subtle morphological changes in the presence of iron ions in solutions. The analysis of the SAXS data is consistent with a hierarchical core-corona micellar structure similar to that found in amphiphilic polymers. The addition of ferric and ferrous iron ions to the protein solution induces morphological changes in the micellar structure by transforming the 3D micelles into objects of reduced dimensionality of 2, with fractal-like characteristics (including Gaussian-chain-like) or, alternatively, platelet-like structures.

Integrated self-assembly of the Mms6 magnetosome protein to form an iron-responsive structure.

A common feature of biomineralization proteins is their self-assembly to produce a surface consistent in size with the inorganic crystals that they produce. Mms6, a small protein of 60 amino acids from Magnetospirillum magneticum strain AMB-1 that promotes the in vitro growth of superparamagnetic magnetite nanocrystals, assembles in aqueous solution to form spherical micelles that could be visualized by TEM and AFM. The results reported here are consistent with the view that the N and C-terminal domains interact with each other within one polypeptide chain and across protein units in the assembly. From studies to determine the amino acid residues important for self-assembly, we identified the unique GL repeat in the N-terminal domain with additional contributions from amino acids in other positions, throughout the molecule. Analysis by CD spectroscopy identified a structural change in the iron-binding C-terminal domain in the presence of Fe3+. A change in the intrinsic fluorescence of tryptophan in the N-terminal domain showed that this structural change is transmitted through the protein. Thus, self-assembly of Mms6 involves an interlaced structure of intra- and inter-molecular interactions that results in a coordinated structural change in the protein assembly with iron binding.

Poly(ε-caprolactone) modified with fusion protein containing self-assembled hydrophobin and functional peptide for selective capture of human blood outgrowth endothelial cells.

Human blood outgrowth endothelial cells (HBOECs)-specific binding peptide, TPSLEQRTVYAK (TPS), was proposed to be applied on autologous cell therapy for treating cardiovascular diseases. Hydrophobins, as a family of self-assembly proteins originated from fungi, have demonstrated unique characteristics to modulate surface properties of other materials coated with these amphiphilic proteins in previous studies. In this report, a fusion protein which was composed of class I hydrophobin HGFI originated from Grifola frondosa and functional peptide TPS was expressed by Pichia pastoris expression system. Then, we purified this fusion protein by ultrafiltration and reverse-phase high performance liquid chromatography. Water contact angle, X-ray photoelectron spectroscopy measurements indicated that the surface properties of hydrophobin were greatly preserved by this fusion protein while comparing with wild HGFI. Cell binding assay showed that this fusion protein demonstrated specific binding property to HBOECs while coating on biodegradable poly(ε-caprolactone) (PCL) grafts in the presence of fetal bovine serum, whereas HGFI-coated PCL non-selectively enhanced all types of cells attachments. Methylthiazol tetrazolium assay was employed to verify the cytocompatibility of this fusion protein-based material. This work presented a new perspective to apply hydrophobin in tissue engineering and regenerative medicine and provided an alternative approach to study endothelial progenitor cells.

Immobilization of anti-CD31 antibody on electrospun poly(ɛ-caprolactone) scaffolds through hydrophobins for specific adhesion of endothelial cells.

Hydrophilicity improvement and bioactive surface design of poly(ɛ-caprolactone) (PCL) grafts are of key importance for their application in tissue engineering. Herein, we develop a convenient approach for achieving stable hydrophilic surfaces by modifying electrospun PCL grafts with a class II hydrophobin (HFBI) coating. Static water contact angles (WCA) demonstrated the conversion of the PCL grafts from hydrophobic to hydrophilic after the introduction of amphiphilic HFBI. ATR-FTIR and XPS confirmed the presence of self-assembled HFBI films on the surface of the PCL nanofibers. The biocompatibility of the HFBI-modified PCL grafts was evaluated by cell proliferation in vitro, and by arteriovenous shunt (AV shunt) experiments ex vivo. Anti-CD31 antibody, which is specific for endothelial cells (ECs), was subsequently immobilized on the HFBI-coated PCL scaffolds through protein-protein interactions. This bioactive PCL graft was found to promote the attachment and retention of endothelial cells. These results suggest that this stepwise strategy for introducing cell-specific binding molecules into PCL scaffolds may have potential for development of vascular grafts that can endothelialize rapidly in vivo.

Prokaryotic expression, purification, and polyclonal antibody production of a hydrophobin from Grifola frondosa.

Hydrophobins are small fungal proteins that self-assemble spontaneously at hydrophilic-hydrophobic interfaces and change the polar nature of the surfaces to which they attach. A new hydrophobin gene hgfI was identified recently from the edible mushroom Grifola frondosa. In this paper, the cloning, expression, purification, and polyclonal antibody preparation of the HGFI were described. The hgfI gene was cloned into pET-28a expression plasmid at the EcoRI and NdeI restriction sites and then transformed into Escherichia coli BL21 strain. SDSPAGE analysis showed that recombinant HGFI protein was satisfactorily expressed by optimizing the concentration and induction time of IPTG. The expressed recombinant HGFI protein was purified by electroelution because its inclusion body was insoluble in traditional processing method. After a desalting procedure with Sephadex G-25, the recombinant HGFI protein was used to immunize adult rabbits following standard protocol. ELISA and western blot analysis indicated that the produced antiserum could detect both HGFI protein expressed in the prokaryotic (E. coli) and in the eukaryotic cells (G. frondosa). Furthermore, the antiserum was used to determine the localization of HGFI protein in G. frondosa cells using an immunofluorescence technique. The results demonstrated that HGFI protein was localized in the cell wall, especially at the budding position of hypha. The polyclonal antibody against HGFI will facilitate further production and functional study of HGFI protein.

Expression and characterization of a Grifola frondosa hydrophobin in Pichia pastoris.

Hydrophobins are small secreted proteins produced by filamentous fungi. Being amphipathic and self-assembling, hydrophobins have drawn great attention since their discovery. The increase of production can reduce the cost and open up several new applications of hydrophobins. We successfully expressed recombinant Class I hydrophobin HGFI (rHGFI) by using pPIC9 vector with an alcohol oxidase 1 promoter in Pichia pastoris. Tricine-SDS-PAGE and Western blotting demonstrated that rHGFI, an 8 kDa protein, was secreted into the culture medium. The culture conditions of the transformant strain were optimized by controlling the methanol concentration and induction time. Ultrafiltration and reverse-phase high performance liquid chromatography were used to perform a large-scale purification of rHGFI. A stable production of rHGFI around 86 mg/L was achieved after the two-step purification. X-ray photoelectron spectroscopy and water contact angle measurements indicated that the functional rHGFI could self-assemble on hydrophobic siliconized glass and Teflon as well as on hydrophilic mica surfaces. A methylthiazol tetrazolium assay showed that rHGFI film could facilitate human aortic smooth muscle cell proliferation due to its cytocompatibility.

Protein HGFI from the edible mushroom Grifola frondosa is a novel 8 kDa class I hydrophobin that forms rodlets in compressed monolayers.

Hydrophobins are a group of low-molecular-mass, cysteine-rich proteins that have unusual biophysical properties. They are highly surface-active and can self-assemble at hydrophobic-hydrophilic interfaces, forming surface layers that are able to reverse the hydropathy of surfaces. Here we describe a novel hydrophobin from the edible mushroom Grifola frondosa, which was named HGFI and belongs to class I. The hydrophobin gene was identified during sequencing of random clones from a cDNA library, and the corresponding protein was isolated as a hot SDS-insoluble aggregate from the cell wall. The purified HGFI was found to have 83 amino acids. The protein sequence deduced from the cDNA sequence had 107 amino acids, from which a 24 aa signal sequence had been cleaved off in the mature protein. This signal sequence was 5 aa longer than had been predicted on the basis of signal peptide analysis of the cDNA. Rodlet mosaic structures were imaged using atomic force microscopy (AFM) on mica surfaces after drying-down HGFI solutions. Using Langmuir films we were also able to take images of both the hydrophobic and hydrophilic sides of films formed at the air-water interface. No distinct structure was observed in films compressed once, but in films compressed several times rodlet structures could be seen. Most rodlets were aligned in the same direction, indicating that formation of rodlets may be promoted during compression of the monolayer.